Residential Duct Cleaning Process

STAGE 1

Area Inspection and Preparation
  • Two certified technicians will arrive on the job site as scheduled.
  • They fill out an activity sheet – mapping out where all the vents are in the house.

Step 1

STAGE 2

  • Our certified technicians will use Commercial Grade Equipment  as powerful as 20,000 house hold vacuums
  • House hold vacuum =”1.3″ CFM
  • Unique Duct Cleaning Machine =”20,000″ CFM

STAGE 3 

  • To protect the floor, our technicians will layer drop sheets.

4 step residential

STAGE 4

  • Any petschildren, or toys should be kept away from the work areas, (if possible out of the house).
  • This is to maximize safety and minimize interruptions to the work process.

step 5 residential

STAGE 5

  • All vents are covered or closed before starting work to achieve negative air pressure and avoid blow backs.

step 6 residential

STAGE 6

  • Our technicians will begin our work from the furnace room.

step 7 residential

STAGE 7

  • This is what your building’s duct system looks like BEFORE cleaning.

step 8 residential

STAGE 8

  • Our 20,000 CFM vacuum is attached to the building’s main supply and return lines.

step 9 residential

STAGE 9

  • Air pressure of 300 PSI  will be blown into all supply and return vents to push dirt and debris into main lines for cleaning.

step 10 residential

STAGE 10

  • Main lines located in the basement are then cleaned with our retractable snake jet system (with the air pressure of 300 PSI).
  • This tool will clean the hard to reach places, including the corners of the line and bring all the loose dirt towards the vacuum working as an air-rake.

step 11 residential

STAGE 11

  • All main duct lines are cleaned with a Semi robotic brush which cleans the inner walls of the duct system.
  • This is repeated 2-5 times as necessary to loosen and agitate dirt and debris towards vacuum.

step 12 residential

STAGE 12

  • Main lines are then again cleaned third time with our retractable snake jet system (with the air pressure of 300 PSI).

step 13 residential

STAGE 13

  • This is what your building’s duct system looks like AFTER cleaning.

step 14 residential

STAGE 14

  • All one-inch access points are closed by installing black plugs Eight-inch access holes are covered using stainless sheet metal plate, sealed with aluminium tape.

step 15 residential

STAGE 15

  • The work area is cleaned. The furnace and air conditioning unit is inspected to ensure everything is in order.

step 16 residential

STAGE 16

  • We will give a Clean Air Certificate.

step 17 residential

STAGE 17

  • We will give a report of our progress to the main occupant.
  • We appreciate your business and we will do whatever it takes to deliver the best service possible.